MacBook Pro M1 Hard Shell Case With Stand for 13 Inch
The MacBook Pro M1 Hard Shell Case With Stand combines everyday laptop protection with a built-in foldable kickstand for compatible 13-inch MacBook Pro models.
Unlike a basic thin shell, this case uses a heavy-duty protective construction with a shock-absorbing wraparound bumper designed to help protect the MacBook against everyday scratches, scuffs, bumps, and accidental impacts.
The integrated stand folds out from the bottom of the case, raising the MacBook into an angled position for typing or viewing. When the stand is no longer required, it can be folded back into the case.
The case also maintains access to compatible ports and incorporates ventilation into the bottom section to support airflow around the MacBook.
Most importantly, this is a model-specific MacBook Pro case. Before ordering, check the model number printed on the underside of your MacBook and compare it with the compatibility list below.
Features & Benefits
Heavy-Duty Hard Shell Protection
The MacBook Pro M1 Hard Shell Case With Stand provides a physical protective layer around the exterior of your MacBook.
Its rigid shell helps reduce direct contact between the aluminium body and surfaces that could cause scratches or scuffs during everyday use.
The design also incorporates a wraparound shock-absorbing bumper, providing additional protection around vulnerable edges and corners.
This makes the case particularly useful for MacBooks that are regularly carried between home, office, university or other work environments.
Built-In Foldable Kickstand
One of the main differences between this case and a conventional MacBook hard shell is the integrated foldable stand.
Open the stand to raise the rear of your MacBook and create an angled position for typing or viewing.
This can provide a different working position when using your MacBook at a desk and may also improve the viewing angle compared with keeping the laptop completely flat.
When you don’t need the stand, fold it back into the bottom section of the case.
Wraparound Bumper for Corners & Edges
Laptop corners and edges can be particularly vulnerable during everyday handling.
The MacBook Pro hard shell case incorporates a protective bumper around the exterior, adding cushioning around these areas rather than relying solely on a thin plastic shell.
The case is designed to help reduce damage from everyday scratches, scuffs, and minor accidental impacts.
I would avoid describing any laptop case as completely “drop-proof,” because the level of protection always depends on the type and severity of impact.
Ventilated Bottom for Airflow
MacBooks release heat during operation, so a protective case should not unnecessarily block the areas designed for airflow.
The bottom section of this MacBook Pro M1 case incorporates ventilation openings that allow air to circulate the laptop while the case is installed.
The raised position created by the kickstand can also provide additional clearance underneath the MacBook while the stand is being used.
Full Access to Ports & Connections
You shouldn’t have to remove your protective case every time you need to connect an accessory.
The shell is molded around the compatible MacBook Pro chassis so the required connections remain accessible.
You can connect compatible charging cables, USB-C accessories, adapters, and other supported peripherals while keeping the case installed.
Snap-On Installation
The two-piece design allows the MacBook Pro M1 Hard Shell Case With Stand to attach directly to compatible MacBook Pro models.
No adhesive or permanent modification is required.
Align the upper and lower sections with the MacBook and carefully snap them into position. The case can also be removed when cleaning or when you prefer to use the MacBook without the shell.
Compatibility & Technical Specifications
| Specification | Details |
|---|
| Product Type | MacBook Pro Hard Shell Case |
| Laptop Size | 13 Inch / 13.3 Inch |
| Material | Polycarbonate |
| Protection Design | Hard Shell + Wraparound Bumper |
| Stand | Built-In Foldable Kickstand |
| Ventilation | Bottom Ventilation Openings |
| Port Access | Accessible With Case Installed |
| Installation | Snap-On / Snap-Off |
| Compatible Models | A2338, A2289, A2251, A2159, A1989, A1706, A1708 |
| MacBook Family | MacBook Pro 13 Inch |
| Package | Top & Bottom Protective Case |
Check Your MacBook Model Before Ordering
MacBook cases are not universally interchangeable, even when two laptops have similar screen sizes.
Turn your MacBook over and look at the small regulatory text printed on the bottom. Find the model number beginning with the letter A.
This case is listed as compatible:
A1706
A1708
A1989
A2159
A2251
A2289
A2338
Your current listing associates these models with the 2016–2020 13-inch MacBook Pro family.
Important A2338 Compatibility Note
Don’t identify an A2338 MacBook solely by the words M1 or by year.
Apple used the A2338 chassis/model number for the 13-inch MacBook Pro with Apple silicon, and cases are primarily determined by the physical chassis.
For this reason, customers should always compare the A-number with the compatibility information rather than choosing a case only because their MacBook says “13-inch.”
Why Use a MacBook Pro Case With Stand?
A conventional hard shell primarily provides exterior protection. A MacBook Pro case with stand combines that protection with an additional working position.
The built-in stand can raise the MacBook when you’re typing, browsing, studying or watching content at a desk.
At the same time, the hard shell remains installed around the laptop to help reduce direct exposure to scratches, scuffs and everyday contact.
This combination makes the case suitable for MacBook users who want both exterior protection and an integrated stand without carrying a separate laptop stand for basic everyday use.
Care & Maintenance
Keeping the case and MacBook clean can help prevent trapped dust from rubbing against the laptop body over time.
Remove the case periodically and use a soft microfiber cleaning cloth to wipe dust from both the MacBook and the inside surfaces of the shell.
Avoid using abrasive cleaners or rough materials.
Before reinstalling the case, make sure both the MacBook and shell are completely clean and dry.
Also check the clips and kickstand periodically to ensure they remain properly positioned.
Frequently Asked Questions
Which MacBook models fit this hard shell case?
The MacBook Pro M1 Hard Shell Case With Stand is listed as compatible with 13-inch models A2338, A2289, A2251, A2159, A1989, A1706, and A1708.
Does this case fit the MacBook Pro M1 A2338?
Yes. A2338 is included in the compatibility list for this case.
Does the case have a built-in stand?
Yes. A foldable kickstand is integrated into the bottom section of the case and can be opened when an angled laptop position is preferred.
Can I use the MacBook ports with the case installed?
Yes. The case is designed to maintain access to the compatible MacBook Pro’s ports and connections.
Does the case block ventilation?
The bottom section includes ventilation openings designed to support airflow while the case is installed.
Is adhesive required to install the case?
No. The hard shell uses a snap-on design and does not require adhesive for normal installation.
Does the case protect the MacBook from scratches?
The hard shell creates a physical barrier around the MacBook exterior that helps reduce direct exposure to everyday scratches, scuffs, and abrasion.
Is this case compatible with every 13-inch MacBook Pro?
No. Screen size alone is not sufficient to determine compatibility. Check the A-number printed underneath your MacBook and compare it with the supported model list before ordering.
Does it fit MacBook Air?
No. This product is designed around compatible MacBook Pro 13-inch chassis. MacBook Air models require their own model-specific cases.
Complete Your MacBook Protection Setup
Pair your MacBook Pro M1 Hard Shell Case With Stand with other compatible MacBook accessories available from Bdonix.
Add a compatible MacBook Pro screen protector to help protect the display against scratches, fingerprints, and everyday contact.
A MacBook Pro keyboard cover can provide an additional barrier against dust, crumbs, and minor accidental liquid exposure around the keyboard.
For regular cleaning, use a microfiber cleaning cloth or laptop cleaning kit to remove fingerprints and dust from the display, case and MacBook body.
You can also browse the MacBook Hard Shell Cases collection to compare other model-specific cases, colours and designs. Bdonix currently carries cases for MacBook Air M1/M2/M3/M4, MacBook Pro and newer MacBook models.
Internal links to add here:
MacBook Pro Screen Protector → Cross-sell
MacBook Pro Keyboard Cover → Cross-sell
Laptop Cleaning Kit / Microfiber Cloth → Cross-sell
MacBook Hard Shell Cases → Parent category
Compatible alternative MacBook Pro case → Sibling/alternative
This is the right place for the majority of your cross-sell/internal links rather than inserting unrelated product links randomly throughout the description.
MacBook Pro M1 Hard Shell Case With Stand for Daily Protection
The MacBook Pro M1 Hard Shell Case With Stand combines a rigid polycarbonate shell, protective wraparound bumper, and integrated foldable kickstand in one model-specific case.
Its ventilated bottom helps maintain airflow, while precisely positioned openings allow compatible ports to remain accessible without removing the shell. The stand provides an additional angled position when working, typing, or viewing content at a desk.
Before ordering, check the model number printed on the underside of your MacBook Pro. This case is listed for compatible A2338, A2289, A2251, A2159, A1989, A1706 and A1708 13-inch MacBook Pro models.
Product Specifications
- This new hardshell case for MacBook Pro 13-inch is designed to be compatible only with 2020, 2019, 2018, 2017, and 2016 releases (models: A1706/A1708/A1989/A2159/A2251/A2289/A2338). Please kindly check the model number “Axxxx” on the bottom of the MacBook before purchasing.
- A high-quality case will protect your device from scratches and abrasion
- Full access to all ports: plug in your charger, cable, or headset without removing the case
- Safe Heat dissipation: Designed with ventilation holes at the bottom part of the cover, ensuring your MacBook is safe.
- The MacBook Pro M1 Hard Shell Case With Stand does not affect opening and closing
- The 13-inch laptop case mold comes from a real MacBook Pro 13, with no effect on any functional holes.
- All four corners of the hardshell case are enclosed to make the MacBook Pro 13 inches fully protected.
- Please check MacBook Pro 13 model numbers A1706/A1708/A1989/A2159/A2251/A2289/A2338; this MacBook Pro 13.3 case is not to be compatible with the unmentioned models.
- The MacBook Pro M1 Hard Shell Case With Stand is made from quality polycarbonate material, making it slim and ultra-lightweight.
- We also have MacBook Pro M1 hard shell cases in Black & Transparent Colors at the best price in Pakistan.
Package Includes:
- 1 x MacBook Pro M1 Hard Shell Case with Stand for A2338, A2251, A2289, A2159, A1989, A1706, A1708 (2016, 2017, 2018, 2019, 2020) Release
Stay Connected with Bdonix
Follow Bdonix for MacBook accessories, protective cases, laptop accessories, and product updates.
📘 Facebook
📸 Instagram
𝕏 X (Twitter)
📌 Pinterest
👻 Snapchat
🎵 TikTok
▶️ YouTube3.001
Reviews
There are no reviews yet.