ORICO Aluminum M.2 NVMe & SATA SSD Enclosure, USB 3.1 Gen 2 Type-C 10Gbps

Detail of Orico NVMe M2 SSD Enclosure:

ORICO Aluminum NVME NGFF（SATA）M.2 (M-Key) Screws SSD Enclosures USB3.1 Gen2 High-Speed Type-C Case Storage up to 2TB for 2230 2242 2260 2280 M.2 SSD-Grey

SLEEP MODE: It will automatically enter into sleep mode when there is no operation within 10 minutes. This helps to prolong the service life of your hard drive.

EASY TO USE: Hot-swappable, Plug & Play, No Driver required. And you can use it widely on computers and Android phones(Android device should have USB-C port and supports OTG)

ORICO Aluminum NVME NGFF（SATA）M.2 (M-Key) Screws SSD Enclosures

• 2TB of storage capacity
• Good Heat Dissipation Aluminum M.2 NVMe & NGFF enclosure with thermal pad.
• Support NVMe M-Key M.2 SSD (PCI-E-based) and M.2 SATA-based SSD (NGFF).
• Transfer Rate: 10Gbps(NVMe), 5Gbps(SATA)
• Weight: 88g
• Size: 29*107*12MM

Adopt Master Chip

• This Orico NVMe M2 SSD Enclosure master controller supports the UASP protocol, transmission speed is faster and more stable. and plug and play with no driver needed, very easy to Use.

Auto-Sleep Function

• Enter sleep mode automatically after being left unused for 10 minutes, it can prolong the service life of SSD.

NOTE:

1. It is expected that the aluminum case heats up, for the high-speed NVMe M.2 drives generate much heat while working.

2. For the brand new SSD drive, it may not find the drive, because the brand new SSD drive should be formatted before the first time using. And also need to make the SSD drive partition.

Easy Installation:

Step 1:

Unscrew the screws from the rear end.

Step 2

Sliding backward to open, then Insert the hard drive.

Step 3
lock the set screws.

Step 4
Insert SSD into the Enclosure and close the cover.

Specification Of Orico NVMe Enclosure:

• APPLICABLE SSD: Compatible with 2230, 2242, 2260 2280 M.2 NVME and NGFF (SATA) SSD solid state drive, support NGFF or NVME protocol memory card; Compatible with Windows / Mac / Linux multi-platform operating system.
• EXCELLENT DISSIPATION PERFORMANCE: This Orico NVMe M2 SSD Enclosure Aluminum is an M.2 SSD mobile hard disk enclosure made of all aluminum alloy, aluminum alloy stripe high-performance heat dissipation design.
• 10GBPS HIGH-SPEED TRANSMISSION: Adopt a high-level master control scheme, support UASP acceleration protocol, and have stable and high-speed data transmission; the SSD equipped with NVMe protocol has a theoretical speed of 10Gbps, while the SSD equipped with NGFF (SATA) protocol has a theoretical speed 6Gbps, up to 2TB SSD can be installed.
• POWERFUL FUNCTIONALITY: This Orico NVMe M2 SSD Enclosure can support intelligent sleep function, energy saving, and environmental protection, reduce hard disk heating, extend hard disk life, sleep for 10 minutes; drive-free, support hot swap, plug and play; LED indicator monitoring, monitor hard disk at any time In working state, the blue light is always on when the power is on, and the blue light flashes when reading data.
• HUMANIZED DESIGN: Slim ALL ALUMINUM body, mini and compact; external use Type-C data output interface, support positive and negative insertion and removal, more convenient to use; with two data lines A TO C, C TO C, 0.15m, according to the purpose Free to match. For Android devices, it should have a USB-C port and support OTG.

Package Includes:

• 1 x Orico NVMe M2 SSD Enclosure
• 1 x Silicone thermal pad
• 1 x Screwdriver
• 1 x Screws
• 1 x 15cm C to A cable
• 1 x 15cm C to C cable